nagios报警延迟的解决--flapping state

nagios报警延迟的解决--flapping state

这个问题是在测试中发现的。因为要在服务器上布置nagios用来监控oracle，可是发现手动shutdown数据库后能够很快报警，但是再startup后就不是很及时，有时会延迟很久。经过研究发现了这个情况，现贴出来与大家分享。

注意看那个类似云朵的图标，那个就是在提示状态抖动，也就是flapping state检测开启了。而一旦开启，就会temporarily suppres notifications。

报警延迟是由于host or service状态不稳定，nagios称之为flapping state在nagios的主配置文件nagios.cfg中，有如下内容：

# FLAP DETECTION OPTION# This option determines whether or not Nagios will try# and detect hosts and services that are "flapping". # Flapping occurs when a host or service changes between# states too frequently. When Nagios detects that a # host or service is flapping, it will temporarily suppress# notifications for that host/service until it stops# flapping. Flap detection is very experimental, so read# the HTML documentation before enabling this feature!# Values: 1 = enable flap detection# 0 = disable flap detection (default)

enable_flap_detection=0#虽然文档里说默认是0，但实际为1.改为0之后就解决了flapping state，并且解决了临时suppress notifications的问题

# FLAP DETECTION THRESHOLDS FOR HOSTS AND SERVICES# Read the HTML documentation on flap detection for# an explanation of what this option does. This option# has no effect if flap detection is disabled.low_service_flap_threshold=5.0high_service_flap_threshold=20.0low_host_flap_threshold=5.0high_host_flap_threshold=20.0

版权声明：本文内容由网络用户投稿，版权归原作者所有，本站不拥有其著作权，亦不承担相应法律责任。如果您发现本站中有涉嫌抄袭或描述失实的内容，请联系我们jiasou666@gmail.com 处理，核实后本网站将在24小时内删除侵权内容。