基于ADP1650设计的1.5A LED闪光驱动技术

基于ADP1650设计的1.5A LED闪光驱动技术

P1650是

公司的集成了

兼容

的1.5A

闪光驱动器.器件集成了1.5MHz或3.0MHz同步电感升压转换器,I2C兼容

和1500mA

源.火炬模式电流高达200mA,效率大于90%(峰值),主要用在照相手机和智能手机以及数码相机,摄像机和PDA.本文介绍了ADP1650主要特性,应用

以及ADP1650

主要特性,详细电路图和材料清单.

1.5 A LED Flash Driver with I2C-Compa

ble Interface

The ADP1650 is a very compact, highly efficient, single whi

LED flash driver for high resolu

on camera phones that improves

cture and video quality in low light environments. The device integrates a prog

mable 1.5 MHz or 3.0 MHz synchronous induc

ve boost converter, an I2C-compa

ble interface, and a 1500 mA current source. The high switching frequency enables the use of a tiny, 1 mm high, low cost, 1 μH power inductor, and the current source per

ts LED cathode grounding for thermally enhanced, low EMI, and compact layouts.

The LED driver maximizes efficiency over the entire battery voltage range to maximize the input-power-to-LED-power conversion and minimize battery current draw during flash events. A programmable dc battery current limit safely maximizes LED current for all LED VF and battery voltage conditions.

Two independent TxMASK inputs permit the flash LED current and battery current to reduce quickly during a power ampl

ier current bu

t. The I2C-compatible interface enables the pro-grammability of timers, currents, and status bit readback for operation monitoring and safety control.

The ADP1650 comes in a compact 12-ball, 0.5 mm pitch package and operates within specification over the full −40℃ to +125℃ junction temperature range.

ADP1650主要特性:

Ultracompact solution

Small, 2 mm × 1.5 mm, 12-ball WLCSP package

Smallest footprint, 1 mm height, 1 μH power inductor

LED current source for local LED grounding

Simplified routing to/from LED

Improved LED thermals

Synchronous 3 MHz PWM boost converter, no external

High efficiency: 90% peak

Reduces high levels of input battery current during flash

Limits battery current drain in torch mode

I2C programmable

Currents up to 1500 mA in flash mode for one LED with 7% accuracy over all conditions

Currents up to 200 mA in torch mode

Programmable dc battery current limit (4 settings)

Programmable flash timer up to 1600 ms

Low VBAT mode to reduce LED current automatically

4-bit

for LED VF, die/LED temperature readback

Control

I2C-compatible control registers

External STROBE and torch input pins

2 transmitter mask (TxMASK) inputs

Safety

Thermal overload protection

Inductor fault detection

LED short-/open-circuit protection

ADP1650应用:

Camera-enabled cellular phones and smart phones

Digital still cameras, camcorders, and PDAs

图1.ADP1650功能方框图

ADP1650 评估板

The motherboard features a 3.3 V regulator and 2.8 V/1.8 V regulators for VDDIO. The daughterboard contains jumpers and test points for easy evaluation of the flash driver IC.

The ADP1650-EVALZ kit includes:

Cables: power (red/black), USB, 2× current measurements

Samples: five ADP1650 devices, two FDSD3012 inductors

LED boards: OSRAM LUWF65N, LumiLEDs PWF-4

图2.ADP1650 评估板外形图

图3.ADP1650 评估板主板电路图

图4.ADP1650 评估板子板电路图

图5.ADP1650 LED插板电路图

图6.ADP1650- EVALZ电路图

评估板材料清单(BOM):

版权声明：本文内容由网络用户投稿，版权归原作者所有，本站不拥有其著作权，亦不承担相应法律责任。如果您发现本站中有涉嫌抄袭或描述失实的内容，请联系我们jiasou666@gmail.com 处理，核实后本网站将在24小时内删除侵权内容。